Follow Us On :

INDUSTRIAL RO PRODUCTS

Industrial Ro Products

100LPH-150LPH RO

Item are perfect for workplaces, Restaurant, production line, Hospitals, Educational Institutes, Health Clubs, material Industry, Pharma Industry and so on. Smaller unit with powerful gentle steel powder covered casing. Adequately evacuates up to 95 % of aggregate broke up solids (TDS) or saltiness to deliver water that is clear and lovely to testicle. Law weight, low fouling ESPA films: chips away at low weight and in this way bring down fouling of the layers. Recuperation of good water least 35% and salt dismissal up to 95%.capable of dealing with water with TDS levels up to 1500 ppm.

100LPH-150LPH RO

1. Raw Water Transfer Pump:

Quantity required
One
Material of construction
Cl
Make of material
Kirloskar/Eqvt/c.g.

2. Multi-Grade Filter:

Quantity required :
One
Size of unit Dia × Ht :
10″ × 54″
Material of Construction :
FRP
Max. pressure drop :
0.5Kg/cm²
Flow control :
Top mounted multi port valve
Media :
Graded silex anthracite& sand
Vessel make :
Water life / Aventura / roosh

3. Activated Carbon Filter:

Quantity required :
One
Size of unit Dia × Ht :
10″ × 54″
Material of Construction :
FRP
Max. pressure drop :
0.5Kg/cm²
Flow control :
Top mounted multi port valve
Media :
Activated carbon
Vessel make :
Water life / Aventura / roosh

4. Antiscaling Dosing System:

Tank :
One
Capacity of tank :
100 Ltr
MoC of tank :
HDPE

5. Dosing Pump:

Quantity required :
One
Type :
Diapharagm type electronic pump
Capacity :
0.5 LPH
Make :
E-dose

6. Micron Filter:

Quantity required :
2
Type :
Disposable cartridge
Operation rate :
1.0m³/hr
Operation pressure :
2.5Kg/cm²
Micron rating :
5 micron
Type of cartridge :
PP wound
MoC :
PP

7. High Pressure Pump:

Quantity required :
One
Operating flow rate :
7.5m³/hr
Operating pressure :
10 – 12 Kg/cm²
Make of pump :
cri./raj
Type of drive :
single phase

8. RO Membrane:

Quantity required :
One
Dimension :
Dia 4″, Length 40″
Working Pressure :
180 psi
Element :
Spiral Wound Membrane
Make :
Filmtech Dow, super flow (USA)

9. Electrical Control Panel:

Quantity required :
One
Material of construction :
MS skid mount.
Electrical components make :
L&T/Siemens/Havell’s./CAURAM

10. Flushing Cleaning System: Connected from feed pump

Quantity required :
One
MoC of pump :
1 HP
Capacity :
1.5m³/hr at 2.5Kg/cm²
UPVC Fitting :
1 Lot

Basics of Design & Water Treatment

PLANT INTRODUCTION

This produces quality water at The stream rate of 250 liters for each hour. It can work constantly for 8 to 9 hours for each day other than 0.5 hour to 1 hour for discharging of The filtration framework.

RAW WATER ANALYSIS

This water treatment system is based on The following water analysis:

Sl. No.
Parameter
Analysis Value
1.
Total Dissolved Solids (ThS)
2000 ppm
2.
Turbidity
1 NTU
3.
SDI
4
4.
Heavy Metals
nil
5.
Organics And Bacteria
nil
6.
Oil And Grease
nil
7.
Residual Chlorine
nil
8.
Temperature
< 40˚C
9.
Color
Colorless
10.
Odour
Very Less Odour
11.
BOD & COD
nil
12.
Total Hardness
850 PPM

END WATER QUALITY

Sl. No.
Parameter
Analysis Value
1.
Total Dissolved Solids (ThS)
100 ppm
2.
PH
7.0 ± 0.2
3.
Turbidity
nil
4.
Color
nil
5.
Hardness
< 50 ppm

RO PLANT OPERATING CONDITION

Sl. No.
Parameter
Analysis Value
1.
Feed Flow Rate
650 Ltr
2.
Product Flow Rate
250 LPH
3.
Rejest Flow Rate
400 LPH
4.
Recovery
35 % to 40 %

TREATMENT SCHEME

Sl. No.
Description
 
Raw Water Storage Taken (By Client)
1.
Raw Water Transfer Pump
2.
Multi–Grade Filter
3.
Activated Carbon Filter
4.
Antiscalant Dosing System
5.
Micron Filter ( 20 micron & 5 micron )
6.
High Pressure Pump
7.
RO Module (Membrane & Membrane Housing)
8.
Flushing/Cleaning System
Products (Pure) Water Storge Tank (By Client)

The end water quality is achieved subject to:

• Bolster quality ought to be same as required. In the event of any adjustment in The nature of crude water, The same may have a suggestion on The working parameters and End-Water nature of The framework.

• Feed restricting a suggestion on The working Para meter and end water nature of The framework

• Feed restricting condition is to be entirely kept up and operation of The water treatment plant ought to be entirely followed in totality according to The working manual and guidelines


250LPH-500LPH RO

250 and 500 LPH RO framework is appropriate for lodging social orders, Hotels, Restaurants, Hospitals, Pharma Industry, Textile Industry, Bottled water, Beverage Production, prepare water, Drinking water.

250LPH-500LPH RO

S.S. Skid :
S.S. 304 quality Skid
Activate Carbon Filter :
12" X 48" Vessel Containing Gravel & Carbon.
MPVF :
1" Multi Port valve (Nylon) TM.
Pre Filter :
20" X 4" 5 Micron PP Filter 1 pcs,
20" X 4" 20 Micron PP Filter 1 pcs.
Grundfos Pump :
CR 3 / 19 – ( SS 316 )
• Feed Pump :
Smart Make 1 HP. Grundfos Make.
Membrane :
40" X 40" ( 2 pcs )
Pressure Meter :
4 Pcs.
Auto Flushing :
Solenoid Valve
Automatic on & off System :
Radar switch.
Indicators :
Power, Working, Low Pressure, High Pressure, Flushing.
Electrical Panel :
Volt Meter, Ampere Meter, Rotary Switch, MCB Switch.
Production Rate :
Upto 500 Lph
Feed Water :
2000 ppm. Max. (Raw Water)
Reject Water :
Appx. 50%.
Power Consumption :
5 H.P ( 3 Phase ).
Warranty :
One year of free on site support

1000LPH & Above RO

1000 LPH RO Systems is helpful in workplaces, doctor's facilities, centers, Nursery homes, magnificence salons, rec centers, schools, eateries, Water Park, Water shops and its high virtue water is utilize full in fake kidney dialysis machine in healing center, Shopping Malls, Airports, Factories, and stockrooms.

1000LPH & Above RO

S.S. Skid :
S.S. 304 quality Skid
Pressure Sand Filter :
13" X 54" Vessel Containing Gravel & Sand.
Activate Carbon Filter :
13" X 54" Vessel Containing Gravel & Carbon.
MPVF :
1" Multi Port valve (Nylon) TM.
Pre Filter :
20" X 4" 5 Micron PP Filter 1 pcs, 20" X 4" 20 Micron PP Filter 1 pcs.
Grundfos Pump :
CR 3 / 21 – ( SS 316 )
Feed Pump :
Smart Make 1 HP.
Membrane :
40" X 40" ( 3 pcs )
Pressure Meter :
4 Pcs.
Auto Flushing :
Solenoid Valve
Automatic on & off System :
Radar switch.
Indicators :
Power, Working, Low Pressure, High Pressure,Flushing.
Electrical Panel :
Volt Meter, Ampere Meter, Rotary Switch, MCB Switch.
Production Rate :
Upto 1000 Lph.
Feed Water :
2000 ppm. Max. (Raw Water)
Reject Water :
Appx. 50%.
Power Consumption :
5 H.P ( 3 Phase ).
Warranty :
One year of free on site support

Industrial RO of Ion Exchange

Industrial RO system is suitable for housing societies, Hotels, Restaurants, Hospitals, Pharma Industry, Textile Industry, Bottled water, Beverage Production, process water, Drinking water.

Industrial RO of Ion Exchange

Models
INDRO 401
INDRO 402
INDRO 403
Output Flow(lit/hr)
200
400
600
Salt Rejection
90-95%
90-95%
90-95%
Pure Water Recovery
35-40%
35-40%
35-40%
Power Supply
220/230Volt,50Hz
415V,50Hz
415V,50Hz
Drive Motor(hp/rpm)
0.75/1450
3.0/2900
3.0/2900
Max Premissible TDS
1500 ppm
2500ppm
2500ppm
Dimensions(W X D X H)
545 x 440 x 1455
1200 X 950 X 1600
1200 X 950 X 1600
Warranty One year of free on site support